Scooter belts, atv belts, gas scooter belts, gates belts: Kevlar performance and stock CVT drive belts.

"I have owned 5 different scooters over the years. 250cc CFMOTO, Roketa 150cc 4-stroke GY6, United Motors 50cc 2-stroke and a SunL 50cc 4-stroke QMB139. I can rest assured that no matter what make or model I have, Partsforscooters.com will always have the parts I need. You have a customer for life!"
Mike R.-California

"I can say, without hesitation, service at your company far exceeds any other of the many distributors & manufacturers I deal with on a daily basis. Prior to opening my shop I spent 23 years as a project manager & customer service manager so I set the bar high for customer service & efficiency. Good job!" Bill Randall, President Fun & Functional Transportation

Results 1-25 of 81

About Drive Belts

Drive Belts for scooters and powersports vehicles usually come in two styles: Synchronous High Torque Drive (HTD) and Continuous Variable Transmission (CVT) Belts.

CVT Belts are measured by three different dimensions and are marked as follows:

669-18-30

Length: 669 Millimeters
Width: 18 Millimeters
Angle: 30 Degrees

Synchronous (HTD) Belts are measured by three different dimensions and are marked as follows:

HTD-600-5M-15

Length: 600 Millimeters
Tooth Spacing: 5 Millimeters
Width: 15 Millimeters

Some belts are made from Kevlar which is the same material that bullet proof vests are made of. They provide more durability, a longer belt life and decreased belt slippage. Kevlar belts are the best belts you can buy for your scooter and we offer a full-selection. Non-Kevlar belts are OEM quality which are made of woven cordage and rubber.

Belt sizes below are listed from smallest to largest.

Rubber Drive Belt 320-5M-25

Part number: 106-2

Drive Belt Belt size HTD 320-5M-25.

Rubber Drive Belt 320-5m-30

Part number: 106-25

Size 320-5m-30 drive belt.

Rubber Drive Belt 339-3M-18

Part number: 106-3

Belt-339-3M-18

Rubber Drive Belt 384-3M-12

Part number: 106-4

Belt-384-3M-12

Rubber Drive Belt 384-3M-14

Part number: 106-5

Belt-384-3M-14

Rubber Drive Belt 399-3M-12

Part number: 120-53

Izip-130 Belt 399-3m-12.

Rubber Drive Belt 399-3M-14

Part number: 106-27

Belt-399-3M-14, used on Razor model 132E. NOT THE E100.

Rubber Drive Belt 405-3M-12 (*Click* for in-stock date)

Part number: 152-2

MC-100E/RL-102 Drive Belt, 405-3M-12. Used on many other scooter models as well.

Rubber Drive Belt 420-5M-15

Part number: 106-6

Belt-420-5M-15

Standard CVT Belt 13x8x425-28

Part number: 106-23

13x8x425-28 CVT belt for pocket bikes and mini-scooters.

Rubber Drive Belt 447-3M-12

Part number: 106-7

Size 447-3M-12 belt used on many electric scooter models.

Rubber Drive Belt 515-5M-15

Part number: 106-47

Belt size 515-5M-15.

Rubber Drive Belt 535-5m-15

Part number: 106-8

Rubber Drive Belt Belt-535-5m-15

Rubber Drive Belt 550-5M-15

Part number: 106-9

Belt-550-5M-15

Rubber Drive Belt 558-3M-14

Part number: 106-10

HTD558-3M-14, may be used in place of size HTD549-3M-14. This belt is about 3/8 inch longer so the scooter axle must be moved a bit to take up the slack.