Universal Parts 24 Volt, 5-Pin Controller for Currie
Universal Parts 24 Volt, 5-Pin Controller for Currie.*Please note: The Over Charge Protector (Charge Inhibitor) does not need to be hooked up. It is a safety feature on newer model scooters so that the scooter won't run while it's charging. This controller works with older models without using the Over Charge Protector plug.
Electronic items are non-returnable
- 24 Volt
- 30 Amp
- DC Brush motor
- 5 Plugs as follows:
- Throttle: 5-pin male(orange/black/red/green/gray)
- Power: 2 single (red/black male/female plug)
- Motor: 2-pin (blue/green female plug)
- Over Charge Protector: 1-pin (red male plug) *Please note: this plug does not have to be hooked up
- Brake: 2-pin (black/white male plug)
eZip 500 Green '08, eZip 500 Green '09, eZip 500 Green '10, eZip 750 Silver (with V-Brake) '08, eZip 750 Silver (with V-Brake) '09, eZip 750 Silver (with V-Brake) '10, eZip 900 Blue '08, eZip 900 Blue '09, GT 500 Silver '06, iZip 400 Red '07, iZip 500 CD Silver '07, iZip 500 DD Blue '07, iZip 500 P/Blue '06, iZip 500 Silver '06, iZip 650 Blue '08, iZip 750 DD Blue '07, iZip 750 DD Blue '08, MG 500 Silver '06, Schwinn 500 Black '06, Schwinn 500 CD Red '07, Schwinn 500 CDFS Red '07, Schwinn 500 Green '08, Schwinn 500 Red '06, Schwinn 650 Red '08, Schwinn 750 DD Grey '07, Various unlisted makes/models